Once again, it is spring and the time to get the tools you will need to keep your grass in good shape. One of those tools is the Weed Wacker or the trimmer. Like any other mechanical device, its trimming must be prepared for use.
The important thing about a trimmer is that you can cut areas of your lawn that your grass cutter has trouble arriving.
There are several things to consider when preparing your trimmer for spring work. They include:
• Power supply
• What are the best weed backers?
• Wacker Wacker Management
• Additional characteristics
Power supply
Weed backers are available for a variety of foods:
• Gas
• Cable electric
• Wireless battery
Gas
When looking for energy, the best option is the trimmer with gasoline. Not only that, gasoline trimmers are wireless. Then there is freedom of movement.
Even so, there are disadvantages of gasoline trimmers. For example, they are stronger than electric trimmers and are also heavier. In addition, it takes more time to keep this trimmer style.
Cable electric
Cable electric trimmings have the disadvantage of being tied to the electric cable. Their advantage is that they are light and easy to handle.
Wireless battery
Perhaps the greatest advantage of wireless battery trim is his freedom of use. It is not tied to the electric cable, so you can use it to mark the entire grass. In addition, this Wacker style is very easy to use.
Of course, as is the case with each grass tool, it has an inconvenience. You must select a trimmer that has a battery that is loadable. There are trimmers that include batteries that allow double the coverage area.
The advantage of light trimmaders
Many say that light trimmers are the best option. Electrical models are the lightest alternative. However, there are differences between the models that operated the same type of power supply.
Those who know suggest that they opt for the lighter Waller. It will handle the machine for long periods of time and a lighter tool is simply easier to handle.
Additional characteristics
Of course, the trimmers are available with a variety of additional features that make them easy to use and more versatile. For example, there are models that become Edgers. In this case, the whker includes a wheel edge that changes position.
The Whaters are also available with a multiple speed configuration to cut into a variety of conditions, telescopic axles to adjust the height of the tool and there are models that include an automatic feeding of the trimmer line that allows more line when necessary.
Maintain a weed backer with gasoline
As mentioned, weeds with gasoline require a maintenance routine to ensure that they work properly.
When it takes the storage for the first time, you must verify the general state of the machine. Check if there are loose screws and nuts and see them again. Also inspect the broken parts, including protection protection and ensure that there is enough line to cut the grass through spring.
It is also recommended that you check the air filter and clean it or replace whether it is dirty or damaged. If it is equipped with a foam filter, it can be washed in warm soap.
It is also important to verify the condition of the spark plug and replace it if necessary. The trimmer will not start if the plug is bad.
It is also advisable to let the trimmer get a little after turning it on.
Maintenance for the whole season
It is recommended to clean the trimmer frequently. Grant particularly on admission vents near the air filter. You must also clean the air filter regularly. It is recommended that the filter clean every 5 hours of work or more often when working in dry and dusty conditions.
Regularly check the gasoline tank, the fuel tube and the filter. In addition, before adding fuel, let the engine cool a bit to avoid a fire.
If you have a 4 cycles trimmer, inspect the oil level regularly and change the oil when it is dirty. Once a season must be sufficient if you don’t use it often.
If you use the trimmer once a month, it is recommended to add stabilizer to fuel.
Finally, there are things to do with the trimmer after the season to ensure that the next spring works correctly. This includes:
• Clean the unit thoroughly of debris and dirt.
• Add the stabilizer to a complete tank of fresh gas and run the engine for a few minutes to distribute the substance completely through the fuel and carburetor.
• If you have a unit of 4 films, change the oil to secure against the oxide and store the trimmer in a clean and dry space.
(Sources: Worx.com and Garden.hivefly.com)
